Post Stock Login Register

ASTM A276/A276M S41040 vs ASTM A959 416Se

Close Alternative — 84.1% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S41040 (ASTM A276/A276M:2017) and ASTM A959 416Se (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S41040 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while ASTM A959 416Se is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A276/A276M S41040 is defined under ASTM International, originating from United States, while ASTM A959 416Se is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A276/A276M S41040 vs ASTM A959 416Se is a 84.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.1%.

Frequently Compared With ASTM A276/A276M S41040:
IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
84.1%
MECHANICAL MATCH
No shared data
OVERALL
84.1%
Specifications
Property ASTM A276/A276M S41040 ASTM A959 416Se
Standard ASTM A276/A276M:2017 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.18 <=0.15
Mn (%) <=1.00 <=1.25
P (%) <=0.040 <=0.06
S (%) <=0.030 <=0.06
Si (%) <=1.00 <=1.00
Cr (%) 11.0-13.0 12.0-14.0
Nb (%) 0.05-0.30 Not specified
Se (%) Not specified >=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S41040 ASTM A959 416Se
Tensile Strength >=480 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=13% Not specified
Hardness <=235 HB Not specified
Condition Condition A (Annealed), hot-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S41040
Stainless steel bars and shapes (hot-finished or cold-finished)
ASTM A959 416Se
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A276/A276M S41040 Be Substituted With ASTM A959 416Se?
ASTM A276/A276M S41040 and ASTM A959 416Se are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A276/A276M S41040
0 active listings and RFQs →
ASTM A959 416Se
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S41040 and ASTM A959 416Se?
ASTM A276/A276M S41040 specifies Nb which is not specified for ASTM A959 416Se. ASTM A959 416Se specifies Se which is not specified for ASTM A276/A276M S41040.
Can ASTM A276/A276M S41040 be substituted with ASTM A959 416Se?
ASTM A276/A276M S41040 and ASTM A959 416Se are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.