Post Stock Login Register

ASTM A276/A276M S41400 vs IS 11169 (Part 2) X12Cr13

Strong Match — 85.4% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S41400 (ASTM A276/A276M:2017) and IS 11169 (Part 2) X12Cr13 (IS 11169 (Part 2):2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S41400 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while IS 11169 (Part 2) X12Cr13 is commonly used for cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 100 mm (clause 1.1, table 14). ASTM A276/A276M S41400 is defined under ASTM International, originating from United States, while IS 11169 (Part 2) X12Cr13 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A276/A276M S41400 vs IS 11169 (Part 2) X12Cr13 is a 85.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.4%.

Frequently Compared With ASTM A276/A276M S41400:
IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
85.4%
MECHANICAL MATCH
No shared data
OVERALL
85.4%
Specifications
Property ASTM A276/A276M S41400 IS 11169 (Part 2) X12Cr13
Standard ASTM A276/A276M:2017 IS 11169 (Part 2):2023
Category Stainless Steel Stainless Steel
C (%) <=0.15 0.08-0.15
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 11.5-13.5 11.5-13.5
Ni (%) 1.25-2.50 <=0.75
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S41400 IS 11169 (Part 2) X12Cr13
Hardness <=298 HB Not specified
Condition Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed) Not specified
Reduction of Area, soft annealed (+A) Not specified >=60% (over 5 to 100 mm)
Tensile Strength, soft annealed (+A) Not specified <=600 MPa (over 5 to 100 mm)
Typical Applications
ASTM A276/A276M S41400
Stainless steel bars and shapes (hot-finished or cold-finished)
IS 11169 (Part 2) X12Cr13
Cold heading and cold extrusion of stainless steel parts; the standard covers wires, wire rods and bars of 0.8 to 100 mm (clause 1.1, Table 14)
Can ASTM A276/A276M S41400 Be Substituted With IS 11169 (Part 2) X12Cr13?
ASTM A276/A276M S41400 and IS 11169 (Part 2) X12Cr13 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 2) X12Cr13 is often considered as a substitute for ASTM A276/A276M S41400 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S41400
0 active listings and RFQs →
IS 11169 (Part 2) X12Cr13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S41400 and IS 11169 (Part 2) X12Cr13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S41400 be substituted with IS 11169 (Part 2) X12Cr13?
ASTM A276/A276M S41400 and IS 11169 (Part 2) X12Cr13 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 2) X12Cr13 is often considered as a substitute for ASTM A276/A276M S41400 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.