Post Stock Login Register

ASTM A276/A276M S44800 vs GOST 5632 08X18H10

Minimal Match — 34.2% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S44800 (ASTM A276/A276M:2017) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S44800 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. ASTM A276/A276M S44800 is defined under ASTM International (United States).

As per chemical composition, ASTM A276/A276M S44800 vs GOST 5632 08X18H10 is a 51.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 34.2%.

Frequently Compared With ASTM A276/A276M S44800:
ASTM A959 29-4-2 ASTM A959 29-4 EN 10088-1 1.4845 ASTM A959 29-4C ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
51.3%
MECHANICAL MATCH
0%
OVERALL
34.2%
Specifications
Property ASTM A276/A276M S44800 GOST 5632 08X18H10
Standard ASTM A276/A276M:2017 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.010 ≤0.08
Mn (%) <=0.30 ≤2.00
P (%) <=0.025 ≤0.035
S (%) <=0.020 ≤0.020
Si (%) <=0.20 ≤0.80
Cr (%) 28.0-30.0 17.0–19.0
Ni (%) 2.00-2.50 9.0–11.0
Mo (%) 3.5-4.2 Not specified
N (%) <=0.020 Not specified
Cu (%) <=0.15 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S44800 GOST 5632 08X18H10
Tensile Strength >=480 MPa ≥520 MPa
Yield Strength >=380 MPa ≥205 MPa
Elongation >=20% ≥40%
Condition Condition A (Annealed), hot-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S44800
Stainless steel bars and shapes (hot-finished or cold-finished)
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can ASTM A276/A276M S44800 Be Substituted With GOST 5632 08X18H10?
ASTM A276/A276M S44800 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A276/A276M S44800
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
ASTM A276/A276M S44800
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S44800 and GOST 5632 08X18H10?
ASTM A276/A276M S44800 specifies Mo, N, Cu which are not specified for GOST 5632 08X18H10.
Can ASTM A276/A276M S44800 be substituted with GOST 5632 08X18H10?
ASTM A276/A276M S44800 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.