Post Stock Login Register

ASTM A387/A387M Grade 12 vs EN 10028-2 10CrMo9-10

Minimal Match — 47.6% match based on chemical composition and mechanical property overlap.

ASTM A387/A387M Grade 12 (ASTM A387/A387M:2011) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. ASTM A387/A387M Grade 12 is typically used for welded boilers and pressure vessels for elevated temperature service, while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. ASTM A387/A387M Grade 12 is defined under ASTM International, originating from United States, while EN 10028-2 10CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A387/A387M Grade 12 vs EN 10028-2 10CrMo9-10 is a 66.7% match. As per mechanical properties, the match is 9.3%. Combined, this makes them a minimal match overall at 47.6%.

Frequently Compared With ASTM A387/A387M Grade 12:
IS 1570 (Part 7) 12Cr4Mo5H IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
66.7%
MECHANICAL MATCH
9.3%
OVERALL
47.6%
Specifications
Property ASTM A387/A387M Grade 12 EN 10028-2 10CrMo9-10
Standard ASTM A387/A387M:2011 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.05-0.17 0.08-0.14
Mn (%) 0.40-0.65 0.40-0.80
P (%) <=0.025 <=0.020
S (%) <=0.025 <=0.010
Si (%) 0.15-0.40 <=0.50
Cr (%) 0.80-1.15 2.00-2.50
Mo (%) 0.45-0.60 0.90-1.10
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A387/A387M Grade 12 EN 10028-2 10CrMo9-10
Tensile Strength 380-550 MPa 480-630 MPa
Yield Strength >=230 MPa >=310 MPa
Elongation >=22% >=18%
Condition Class 1 plates, no thickness ranges printed; elongation in 50 mm gauge length Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
ASTM A387/A387M Grade 12
Welded boilers and pressure vessels for elevated temperature service
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can ASTM A387/A387M Grade 12 Be Substituted With EN 10028-2 10CrMo9-10?
ASTM A387/A387M Grade 12 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A387/A387M Grade 12
0 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A387/A387M Grade 12 and EN 10028-2 10CrMo9-10?
EN 10028-2 10CrMo9-10 specifies N, Cu which are not specified for ASTM A387/A387M Grade 12.
Can ASTM A387/A387M Grade 12 be substituted with EN 10028-2 10CrMo9-10?
ASTM A387/A387M Grade 12 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.