Post Stock Login Register

ASTM A572 Gr.65 vs EN 10025-3 S460JR

Close Alternative — 73.3% match based on chemical composition and mechanical property overlap.

ASTM A572 Gr.65 (ASTM A572) and EN 10025-3 S460JR (EN 10025-3:2019) are both steel grades. Both fall under the Structural Steel category. ASTM A572 Gr.65 is typically used for used for bridges, buildings, transmission towers, construction equipment, offshore structures, and structural members., while EN 10025-3 S460JR is commonly used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.. ASTM A572 Gr.65 is defined under ASTM International, originating from United States, while EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A572 Gr.65 vs EN 10025-3 S460JR is a 91.8% match. As per mechanical properties, the match is 36.1%. Combined, this makes them a close alternative overall at 73.3%.

Frequently Compared With ASTM A572 Gr.65:
ASTM A572 Grade 50 ASTM A283C CSA G40.21 300W CSA G40.21 350W CSA G40.21 400W GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 480W AS/NZS 3679.1 350 AS/NZS 1595 C450 ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
91.8%
MECHANICAL MATCH
36.1%
OVERALL
73.3%
Specifications
Property ASTM A572 Gr.65 EN 10025-3 S460JR
Standard ASTM A572 EN 10025-3:2019
Category Structural Steel Structural Steel
C (%) 0.23 max 0.20 max
Mn (%) 1.35 max 1.70 max
Si (%) 0.40 max 0.60 max
V (%) 0.15 max 0.12 max
Nb (%) 0.05 max 0.06 max
P (%) 0.040 max 0.030 max
S (%) 0.050 max 0.030 max
Ti (%) Not specified 0.05 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A572 Gr.65 EN 10025-3 S460JR
Tensile Strength 550-690 MPa 540-720 MPa
Yield Strength 450 MPa min 460 MPa min
Elongation 18-21% 17% min
Hardness 170-220 HB 180-230 HB
Typical Applications
ASTM A572 Gr.65
Used for bridges, buildings, transmission towers, construction equipment, offshore structures, and structural members.
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
Key Differences
Can ASTM A572 Gr.65 Be Substituted With EN 10025-3 S460JR?
ASTM A572 Gr.65 and EN 10025-3 S460JR are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
ASTM A572 Gr.65
Plate → (4 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2600–4400 mm (102.36–173.23 in)
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
On M-EX Right Now
ASTM A572 Gr.65
4 active listings and RFQs →
EN 10025-3 S460JR
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A572 Gr.65 and EN 10025-3 S460JR?
EN 10025-3 S460JR specifies Ti which is not specified for ASTM A572 Gr.65.
Can ASTM A572 Gr.65 be substituted with EN 10025-3 S460JR?
ASTM A572 Gr.65 and EN 10025-3 S460JR are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.