Post Stock Login Register

ASTM A681 D7 vs IS 1570 (Part 4) XT160Cr48

Related Material — 65% match based on chemical composition and mechanical property overlap.

ASTM A681 D7 (ASTM A681:2008) and IS 1570 (Part 4) XT160Cr48 (IS 1570 (Part 4):1988) are both steel grades. ASTM A681 D7 is classified under Tool & Die Steels, while IS 1570 (Part 4) XT160Cr48 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. ASTM A681 D7 is defined under ASTM International, originating from United States, while IS 1570 (Part 4) XT160Cr48 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A681 D7 vs IS 1570 (Part 4) XT160Cr48 is a 68.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With ASTM A681 D7:
DIN EN ISO 4957 1.2379 GOST 5950 3H2W8F EN ISO 683-17 100Cr6 IS 1570 (Part 6) 118T3 GB/T 1299 3Cr2W8V EN ISO 4957 1.2316 DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS
Match Breakdown
CHEMISTRY MATCH
68.2%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property ASTM A681 D7 IS 1570 (Part 4) XT160Cr48
Standard ASTM A681:2008 IS 1570 (Part 4):1988
Category Tool & Die Steels Alloy Steel
C (%) 2.15-2.50 1.50-1.70
Mn (%) 0.10-0.60 0.25-0.50
P (%) <=0.030 Not specified
S (%) <=0.030 Not specified
Si (%) 0.10-0.60 0.10-0.35
Cr (%) 11.50-13.50 11.0-13.0
V (%) 3.80-4.40 <=0.80
Mo (%) 0.70-1.20 <=0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A681 D7 IS 1570 (Part 4) XT160Cr48
Hardness <=262 HB Not specified
Condition Annealed (maximum Brinell hardness) Not specified
Typical Applications
ASTM A681 D7
Tools, dies and fixtures (clause 1.2)
IS 1570 (Part 4) XT160Cr48
Not documented
Key Differences
Can ASTM A681 D7 Be Substituted With IS 1570 (Part 4) XT160Cr48?
ASTM A681 D7 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A681 D7
0 active listings and RFQs →
IS 1570 (Part 4) XT160Cr48
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A681 D7 and IS 1570 (Part 4) XT160Cr48?
Different category: ASTM A681 D7 is Tool & Die Steels, IS 1570 (Part 4) XT160Cr48 is Alloy Steel. ASTM A681 D7 specifies P, S which are not specified for IS 1570 (Part 4) XT160Cr48.
Can ASTM A681 D7 be substituted with IS 1570 (Part 4) XT160Cr48?
ASTM A681 D7 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.