Post Stock Login Register

ASTM A959 201L vs EN 10088-1 X2CrMnNiN17-7-5

Strong Match — 88.3% match based on chemical composition and mechanical property overlap.

ASTM A959 201L (ASTM A959:2011) and EN 10088-1 X2CrMnNiN17-7-5 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 201L is defined under ASTM International, originating from United States, while EN 10088-1 X2CrMnNiN17-7-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 201L vs EN 10088-1 X2CrMnNiN17-7-5 is a 88.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.3%.

Frequently Compared With ASTM A959 201L:
ASTM A959 .- ASTM A959 201LN EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 08X18H10 EN 10088-1 1.4006
Match Breakdown
CHEMISTRY MATCH
88.3%
MECHANICAL MATCH
No shared data
OVERALL
88.3%
Specifications
Property ASTM A959 201L EN 10088-1 X2CrMnNiN17-7-5
Standard ASTM A959:2011 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.03 <=0.030
Cr (%) 16.0-18.0 16.0-17.5
Mn (%) 5.5-7.5 6.0-8.0
N (%) <=0.25 0.15-0.25
Ni (%) 3.5-5.5 3.5-5.5
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Si (%) <=1.00 <=1.00
Cu (%) Not specified <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 201L
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X2CrMnNiN17-7-5
Not documented
Key Differences
Can ASTM A959 201L Be Substituted With EN 10088-1 X2CrMnNiN17-7-5?
ASTM A959 201L and EN 10088-1 X2CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrMnNiN17-7-5 is often considered as a substitute for ASTM A959 201L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 201L
0 active listings and RFQs →
EN 10088-1 X2CrMnNiN17-7-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 201L and EN 10088-1 X2CrMnNiN17-7-5?
EN 10088-1 X2CrMnNiN17-7-5 specifies Cu which is not specified for ASTM A959 201L.
Can ASTM A959 201L be substituted with EN 10088-1 X2CrMnNiN17-7-5?
ASTM A959 201L and EN 10088-1 X2CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrMnNiN17-7-5 is often considered as a substitute for ASTM A959 201L in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.