Post Stock Login Register

ASTM A959 29-4 vs ASTM A959 XM-27

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 29-4 (ASTM A959:2011) and ASTM A959 XM-27 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 29-4 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 XM-27 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 29-4 is defined under ASTM International, originating from United States, while ASTM A959 XM-27 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 29-4 vs ASTM A959 XM-27 is a 70.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 29-4:
ASTM A959 29-4C ASTM A959 .- ASTM A959 25-4-4 GOST 5632 06Kh23N28 ASTM A959 29-4-2 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
70.7%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 29-4 ASTM A959 XM-27
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.010
Cr (%) 28.0-30.0 25.0-27.5
Cu (%) <=0.15 <=0.20
Mn (%) <=0.30 <=0.40
Mo (%) 3.5-4.2 0.75-1.50
N (%) <=0.020 <=0.015
Ni (%) <=0.15 <=0.50
P (%) <=0.025 <=0.020
S (%) <=0.020 <=0.020
Si (%) <=0.20 <=0.40
Cb (%) Not specified 0.05-0.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 29-4
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 XM-27
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 29-4 Be Substituted With ASTM A959 XM-27?
ASTM A959 29-4 and ASTM A959 XM-27 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 29-4
0 active listings and RFQs →
ASTM A959 XM-27
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 29-4 and ASTM A959 XM-27?
ASTM A959 XM-27 specifies Cb which is not specified for ASTM A959 29-4.
Can ASTM A959 29-4 be substituted with ASTM A959 XM-27?
ASTM A959 29-4 and ASTM A959 XM-27 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.