Post Stock Login Register

ASTM A959:2011 301 Steel: Specifications & Listings

ASTM A959:2011 301: Austenitic stainless steel type 301 (UNS S30100) with the composition limits of ASTM A959-11. Carbon up to 0.15% and chromium 16.0-18.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 301
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
IS 6911 X10Cr17Ni7 IS 6911:1992 India No activity yet
ASTM A240/A240M S30100 ASTM A240/A240M:2025 USA No activity yet
JIS G4304 SUS301 JIS G4304:2021 Japan No activity yet
EN 10088-1 X5CrNi17-7 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-3 X5CrNi17-7 EN 10088-3:2014 Europe No activity yet
ASTM A276/A276M S30200 ASTM A276/A276M:2017 USA No activity yet
ASTM A240/A240M S30435 ASTM A240/A240M:2025 USA No activity yet
JIS G4304 SUS301J1 JIS G4304:2021 Japan No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A240/A240M S30100 ASTM A240/A240M:2025 Strong Match
IS 6911 X10Cr17Ni7 IS 6911:1992 Strong Match
JIS G4304 SUS301 JIS G4304:2021 Strong Match
JIS G4305 SUS301 JIS G4305:2012 Strong Match
EN 10088-1 X5CrNi17-7 EN 10088-1:2014 Strong Match
EN 10088-3 X5CrNi17-7 EN 10088-3:2014 Strong Match
EN 10088-2 X5CrNi17-7 EN 10088-2:2014 Strong Match
ASTM A959 302 ASTM A959:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn N Ni P S Si
<=0.15 16.0-18.0 <=2.00 <=0.10 6.0-8.0 <=0.045 <=0.030 <=1.00

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S30100
Metallurgical class
Austenitic grade: usually predominantly face-centered cubic, hardenable only by cold working
Type
301 (designation originally assigned by the American Iron and Steel Institute)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 301 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 301 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 301

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 301 at this time.

Register for Alerts