Strong Match — 91.7% match
based on chemical composition and mechanical property overlap.
ASTM A959 314 (ASTM A959:2011) and ASTM A959 SS310 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 314 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 SS310 is commonly used for furnace parts, heat exchangers, kiln components.
ASTM A959 314 is defined under ASTM International, originating from United States, while ASTM A959 SS310 is defined under ASTM International, originating from United States.
As per chemical composition, ASTM A959 314 vs ASTM A959 SS310 is a 91.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 314
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 SS310
Furnace parts, heat exchangers, kiln components
Can ASTM A959 314 Be Substituted With ASTM A959 SS310?
ASTM A959 314 and ASTM A959 SS310 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS310 is often considered as a substitute for ASTM A959 314 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A959 314 and ASTM A959 SS310?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 314 be substituted with ASTM A959 SS310?
ASTM A959 314 and ASTM A959 SS310 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS310 is often considered as a substitute for ASTM A959 314 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.