Post Stock Login Register

ASTM A959 314 vs EN 10088-1 X15CrNiSi25-21

Strong Match — 89.5% match based on chemical composition and mechanical property overlap.

ASTM A959 314 (ASTM A959:2011) and EN 10088-1 X15CrNiSi25-21 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 314 is defined under ASTM International, originating from United States, while EN 10088-1 X15CrNiSi25-21 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 314 vs EN 10088-1 X15CrNiSi25-21 is a 89.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.5%.

Frequently Compared With ASTM A959 314:
GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
89.5%
MECHANICAL MATCH
No shared data
OVERALL
89.5%
Specifications
Property ASTM A959 314 EN 10088-1 X15CrNiSi25-21
Standard ASTM A959:2011 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.25 <=0.20
Cr (%) 23.0-26.0 24.0-26.0
Mn (%) <=2.00 <=2.00
Ni (%) 19.0-22.0 19.0-22.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Si (%) 1.50-3.00 1.50-2.50
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 314
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X15CrNiSi25-21
Not documented
Key Differences
Can ASTM A959 314 Be Substituted With EN 10088-1 X15CrNiSi25-21?
ASTM A959 314 and EN 10088-1 X15CrNiSi25-21 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X15CrNiSi25-21 is often considered as a substitute for ASTM A959 314 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 314
0 active listings and RFQs →
EN 10088-1 X15CrNiSi25-21
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 314 and EN 10088-1 X15CrNiSi25-21?
EN 10088-1 X15CrNiSi25-21 specifies N which is not specified for ASTM A959 314.
Can ASTM A959 314 be substituted with EN 10088-1 X15CrNiSi25-21?
ASTM A959 314 and EN 10088-1 X15CrNiSi25-21 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X15CrNiSi25-21 is often considered as a substitute for ASTM A959 314 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.