Post Stock Login Register

ASTM A959 316Cb vs IS 1570 (Part 7) 12Cr12MoVH

Minimal Match — 51.5% match based on chemical composition and mechanical property overlap.

ASTM A959 316Cb (ASTM A959:2011) and IS 1570 (Part 7) 12Cr12MoVH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 316Cb is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while IS 1570 (Part 7) 12Cr12MoVH is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. ASTM A959 316Cb is defined under ASTM International, originating from United States, while IS 1570 (Part 7) 12Cr12MoVH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A959 316Cb vs IS 1570 (Part 7) 12Cr12MoVH is a 51.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 51.5%.

Frequently Compared With ASTM A959 316Cb:
EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4401 GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
51.5%
MECHANICAL MATCH
No shared data
OVERALL
51.5%
Specifications
Property ASTM A959 316Cb IS 1570 (Part 7) 12Cr12MoVH
Standard ASTM A959:2011 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) <=0.08 0.08-0.16
Cr (%) 16.0-18.0 11.5-13.00
Mn (%) <=2.00 0.40-1.00
Mo (%) 2.00-3.00 0.40-0.80
N (%) <=0.10 Not specified
Ni (%) 10.0-14.0 <=1.0
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.035
Si (%) <=1.00 <=0.60
V (%) Not specified 0.10-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 316Cb IS 1570 (Part 7) 12Cr12MoVH
Tensile Strength Not specified 770-930 MPa
Yield Strength Not specified >=585 MPa (0.2 % proof stress)
Elongation Not specified >=15%
Condition Not specified Bars, forgings, Q+T, thickness up to 150 (first row of Table 3)
Typical Applications
ASTM A959 316Cb
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
IS 1570 (Part 7) 12Cr12MoVH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can ASTM A959 316Cb Be Substituted With IS 1570 (Part 7) 12Cr12MoVH?
ASTM A959 316Cb and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 316Cb
0 active listings and RFQs →
IS 1570 (Part 7) 12Cr12MoVH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 316Cb and IS 1570 (Part 7) 12Cr12MoVH?
ASTM A959 316Cb specifies N which is not specified for IS 1570 (Part 7) 12Cr12MoVH. IS 1570 (Part 7) 12Cr12MoVH specifies V which is not specified for ASTM A959 316Cb.
Can ASTM A959 316Cb be substituted with IS 1570 (Part 7) 12Cr12MoVH?
ASTM A959 316Cb and IS 1570 (Part 7) 12Cr12MoVH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.