Strong Match — 97.2% match
based on chemical composition and mechanical property overlap.
ASTM A959 317 (ASTM A959:2011) and IS 6603 X04Cr18Ni12Mo3 (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 317 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while IS 6603 X04Cr18Ni12Mo3 is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars.
ASTM A959 317 is defined under ASTM International, originating from United States, while IS 6603 X04Cr18Ni12Mo3 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, ASTM A959 317 vs IS 6603 X04Cr18Ni12Mo3 is a 97.2% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 97.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A959 317
IS 6603 X04Cr18Ni12Mo3
Tensile Strength
Not specified
>=515 MPa
Yield Strength
Not specified
>=205 MPa
Elongation
Not specified
>=40%
Condition
Not specified
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
ASTM A959 317
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
IS 6603 X04Cr18Ni12Mo3
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
IS 6603 X04Cr18Ni12Mo3 specifies N which is not specified for ASTM A959 317.
Can ASTM A959 317 Be Substituted With IS 6603 X04Cr18Ni12Mo3?
ASTM A959 317 and IS 6603 X04Cr18Ni12Mo3 overlap closely enough on chemistry and mechanical properties that IS 6603 X04Cr18Ni12Mo3 is often considered as a substitute for ASTM A959 317 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A959 317 and IS 6603 X04Cr18Ni12Mo3?
IS 6603 X04Cr18Ni12Mo3 specifies N which is not specified for ASTM A959 317.
Can ASTM A959 317 be substituted with IS 6603 X04Cr18Ni12Mo3?
ASTM A959 317 and IS 6603 X04Cr18Ni12Mo3 overlap closely enough on chemistry and mechanical properties that IS 6603 X04Cr18Ni12Mo3 is often considered as a substitute for ASTM A959 317 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.