Post Stock Login Register

ASTM A959:2011 348 Steel: Specifications & Listings

ASTM A959:2011 348: Austenitic stainless steel type 348 (UNS S34800) with the composition limits of ASTM A959-11. Carbon up to 0.08% and chromium 17.0-19.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 348
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A240/A240M S34800 ASTM A240/A240M:2025 USA No activity yet
IS 1570 (Part 5) X04Cr18Ni10Ti IS 1570 (Part 5):1985 India No activity yet
IS 1570 (Part 5) X04Cr18Ni10Nb IS 1570 (Part 5):1985 India No activity yet
BS 970 (Part 1) 321S31 BS 970 (Part 1):1991 UK No activity yet
BS 970 (Part 1) 347S31 BS 970 (Part 1):1991 UK No activity yet
ASTM A240/A240M S34809 ASTM A240/A240M:2025 USA No activity yet
EN 10088-3 X6CrNiTi18-10 EN 10088-3:2014 Europe No activity yet
EN 10088-2 X6CrNiNb18-10 EN 10088-2:2014 Europe No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A240/A240M S34800 ASTM A240/A240M:2025 Strong Match
IS 1570 (Part 5) X04Cr18Ni10Ti IS 1570 (Part 5):1985 Strong Match
IS 1570 (Part 5) X04Cr18Ni10Nb IS 1570 (Part 5):1985 Strong Match
IS 11169 (Part 2) X04Cr18Ni10Ti IS 11169 (Part 2):1989 Strong Match
IS 6911 X04Cr18Ni10Ti IS 6911:1992 Strong Match
IS 6911 X04Cr18Ni10Nb IS 6911:1992 Strong Match
ASTM A959 347 ASTM A959:2011 Strong Match
BS 970 (Part 1) 321S31 BS 970 (Part 1):1991 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Co Cr Mn Ni P S Si Ta
<=0.08 <=0.20 17.0-19.0 <=2.00 9.0-12.0 <=0.045 <=0.030 <=1.00 <=0.10

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S34800
Metallurgical class
Austenitic grade: usually predominantly face-centered cubic, hardenable only by cold working
Type
348 (designation originally assigned by the American Iron and Steel Institute)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
Cb+Ta-10xC-1.10, Ta 0.10, Co 0.20
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 348 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 348 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 348

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 348 at this time.

Register for Alerts