Post Stock Login Register

ASTM A959 420FSe vs EN 10088-1 X29CrS13

Strong Match — 86.5% match based on chemical composition and mechanical property overlap.

ASTM A959 420FSe (ASTM A959:2011) and EN 10088-1 X29CrS13 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 420FSe is defined under ASTM International, originating from United States, while EN 10088-1 X29CrS13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 420FSe vs EN 10088-1 X29CrS13 is a 86.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.5%.

Frequently Compared With ASTM A959 420FSe:
EN 10088-1 1.4006 EN 10088-1 1.4401 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
86.5%
MECHANICAL MATCH
No shared data
OVERALL
86.5%
Specifications
Property ASTM A959 420FSe EN 10088-1 X29CrS13
Standard ASTM A959:2011 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.20-0.40 0.25-0.32
Cr (%) 12.0-14.0 12.0-13.5
Mn (%) <=1.25 <=1.50
Mo (%) <=0.50 <=0.60
P (%) <=0.06 <=0.040
S (%) <=0.06 0.15-0.25
Se (%) >=0.15 Not specified
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 420FSe
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X29CrS13
Not documented
Key Differences
Can ASTM A959 420FSe Be Substituted With EN 10088-1 X29CrS13?
ASTM A959 420FSe and EN 10088-1 X29CrS13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X29CrS13 is often considered as a substitute for ASTM A959 420FSe in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 420FSe
0 active listings and RFQs →
EN 10088-1 X29CrS13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 420FSe and EN 10088-1 X29CrS13?
ASTM A959 420FSe specifies Se which is not specified for EN 10088-1 X29CrS13.
Can ASTM A959 420FSe be substituted with EN 10088-1 X29CrS13?
ASTM A959 420FSe and EN 10088-1 X29CrS13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X29CrS13 is often considered as a substitute for ASTM A959 420FSe in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.