Post Stock Login Register

ASTM A959 440FSe vs ASTM A959 SS410

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 440FSe (ASTM A959:2011) and ASTM A959 SS410 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 440FSe is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 SS410 is commonly used for cutlery, turbine blades, surgical instruments, fasteners. ASTM A959 440FSe is defined under ASTM International, originating from United States, while ASTM A959 SS410 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 440FSe vs ASTM A959 SS410 is a 79.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 440FSe:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- EN 10088-1 1.4301
Match Breakdown
CHEMISTRY MATCH
79.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 440FSe ASTM A959 SS410
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.95-1.20 <=0.15
Cr (%) 16.0-18.0 11.5-13.5
Mn (%) <=1.25 <=1.00
P (%) <=0.06 <=0.040
S (%) <=0.06 <=0.030
Se (%) >=0.15 Not specified
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 440FSe
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 SS410
Cutlery, turbine blades, surgical instruments, fasteners
Key Differences
Can ASTM A959 440FSe Be Substituted With ASTM A959 SS410?
ASTM A959 440FSe and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 440FSe
No active listings currently.
ASTM A959 SS410
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2800–3300 mm (110.24–129.92 in)
On M-EX Right Now
ASTM A959 440FSe
0 active listings and RFQs →
ASTM A959 SS410
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 440FSe and ASTM A959 SS410?
ASTM A959 440FSe specifies Se which is not specified for ASTM A959 SS410.
Can ASTM A959 440FSe be substituted with ASTM A959 SS410?
ASTM A959 440FSe and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.