Post Stock Login Register

ASTM A959 S18235 vs ASTM A959 29-4C

Related Material — 68.5% match based on chemical composition and mechanical property overlap.

ASTM A959 S18235 (ASTM A959:2011) and ASTM A959 29-4C (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S18235 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 29-4C is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S18235 is defined under ASTM International, originating from United States, while ASTM A959 29-4C is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S18235 vs ASTM A959 29-4C is a 68.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 68.5%.

Frequently Compared With ASTM A959 S18235:
GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoH GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- EN 10088-1 1.4301 GOST 5632 08X18H10
Match Breakdown
CHEMISTRY MATCH
68.5%
MECHANICAL MATCH
No shared data
OVERALL
68.5%
Specifications
Property ASTM A959 S18235 ASTM A959 29-4C
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.030
Cr (%) 17.5-18.5 28.0-30.0
Mn (%) <=0.50 <=1.00
Mo (%) 2.00-2.50 3.6-4.2
N (%) <=0.025 <=0.045
Ni (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) 0.15-0.35 <=0.030
Si (%) <=1.00 <=1.00
Ti (%) 0.030-1.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S18235
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 29-4C
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S18235 Be Substituted With ASTM A959 29-4C?
ASTM A959 S18235 and ASTM A959 29-4C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S18235
0 active listings and RFQs →
ASTM A959 29-4C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S18235 and ASTM A959 29-4C?
ASTM A959 S18235 specifies Ti which is not specified for ASTM A959 29-4C.
Can ASTM A959 S18235 be substituted with ASTM A959 29-4C?
ASTM A959 S18235 and ASTM A959 29-4C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.