Post Stock Login Register

ASTM A959 S21500 vs EN 10088-1 X10CrNiMoMnNbVB15-10-1

Strong Match — 87.5% match based on chemical composition and mechanical property overlap.

ASTM A959 S21500 (ASTM A959:2011) and EN 10088-1 X10CrNiMoMnNbVB15-10-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S21500 is defined under ASTM International, originating from United States, while EN 10088-1 X10CrNiMoMnNbVB15-10-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S21500 vs EN 10088-1 X10CrNiMoMnNbVB15-10-1 is a 87.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87.5%.

Frequently Compared With ASTM A959 S21500:
GOST 5632 08X18H10 EN 10088-1 1.4845 ASTM A959 .- EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 16-8-2H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006
Match Breakdown
CHEMISTRY MATCH
87.5%
MECHANICAL MATCH
No shared data
OVERALL
87.5%
Specifications
Property ASTM A959 S21500 EN 10088-1 X10CrNiMoMnNbVB15-10-1
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
B (%) 0.003-0.009 0.003-0.009
C (%) 0.06-0.15 0.07-0.13
Cb (%) 0.75-1.25 Not specified
Cr (%) 14.0-16.0 14.0-16.0
Mn (%) 5.5-7.0 5.5-7.0
Mo (%) 0.80-1.20 0.80-1.20
Ni (%) 9.0-11.0 9.0-11.0
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.030
Si (%) 0.2-1.0 <=1.00
V (%) 0.15-0.40 0.15-0.40
N (%) Not specified <=0.10
Nb (%) Not specified 0.75-1.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S21500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X10CrNiMoMnNbVB15-10-1
Not documented
Key Differences
Can ASTM A959 S21500 Be Substituted With EN 10088-1 X10CrNiMoMnNbVB15-10-1?
ASTM A959 S21500 and EN 10088-1 X10CrNiMoMnNbVB15-10-1 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrNiMoMnNbVB15-10-1 is often considered as a substitute for ASTM A959 S21500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S21500
0 active listings and RFQs →
EN 10088-1 X10CrNiMoMnNbVB15-10-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S21500 and EN 10088-1 X10CrNiMoMnNbVB15-10-1?
ASTM A959 S21500 specifies Cb which is not specified for EN 10088-1 X10CrNiMoMnNbVB15-10-1. EN 10088-1 X10CrNiMoMnNbVB15-10-1 specifies N, Nb which are not specified for ASTM A959 S21500.
Can ASTM A959 S21500 be substituted with EN 10088-1 X10CrNiMoMnNbVB15-10-1?
ASTM A959 S21500 and EN 10088-1 X10CrNiMoMnNbVB15-10-1 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrNiMoMnNbVB15-10-1 is often considered as a substitute for ASTM A959 S21500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.