Post Stock Login Register

ASTM A959 S21500 vs JIS G4305 SUS434

Related Material — 59.2% match based on chemical composition and mechanical property overlap.

ASTM A959 S21500 (ASTM A959:2011) and JIS G4305 SUS434 (JIS G4305:2012) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S21500 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while JIS G4305 SUS434 is commonly used for cold-rolled stainless steel plates, sheet and strip. ASTM A959 S21500 is defined under ASTM International, originating from United States, while JIS G4305 SUS434 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, ASTM A959 S21500 vs JIS G4305 SUS434 is a 59.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.2%.

Frequently Compared With ASTM A959 S21500:
ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 16-8-2H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
59.2%
MECHANICAL MATCH
No shared data
OVERALL
59.2%
Specifications
Property ASTM A959 S21500 JIS G4305 SUS434
Standard ASTM A959:2011 JIS G4305:2012
Category Stainless Steel Stainless Steel
B (%) 0.003-0.009 Not specified
C (%) 0.06-0.15 <=0.12
Cb (%) 0.75-1.25 Not specified
Cr (%) 14.0-16.0 16.00-18.00
Mn (%) 5.5-7.0 <=1.00
Mo (%) 0.80-1.20 0.75-1.25
Ni (%) 9.0-11.0 <=0.60
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.030
Si (%) 0.2-1.0 <=1.00
V (%) 0.15-0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 S21500 JIS G4305 SUS434
Tensile Strength Not specified >=450 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=22%
Hardness Not specified <=183 HB
Condition Not specified Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
ASTM A959 S21500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
JIS G4305 SUS434
Cold-rolled stainless steel plates, sheet and strip
Key Differences
Can ASTM A959 S21500 Be Substituted With JIS G4305 SUS434?
ASTM A959 S21500 and JIS G4305 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S21500
0 active listings and RFQs →
JIS G4305 SUS434
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S21500 and JIS G4305 SUS434?
ASTM A959 S21500 specifies B, Cb, V which are not specified for JIS G4305 SUS434.
Can ASTM A959 S21500 be substituted with JIS G4305 SUS434?
ASTM A959 S21500 and JIS G4305 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.