Post Stock Login Register

ASTM A959 S28200 vs EN 10088-1 X6CrMo17-1

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S28200 (ASTM A959:2011) and EN 10088-1 X6CrMo17-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S28200 is defined under ASTM International, originating from United States, while EN 10088-1 X6CrMo17-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S28200 vs EN 10088-1 X6CrMo17-1 is a 71.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 S28200:
IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10
Match Breakdown
CHEMISTRY MATCH
71.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 S28200 EN 10088-1 X6CrMo17-1
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.08
Cr (%) 17.0-19.0 16.0-18.0
Cu (%) 0.75-1.25 Not specified
Mn (%) 17.0-19.0 <=1.00
Mo (%) 0.75-1.25 0.90-1.40
N (%) 0.40-0.60 Not specified
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.015
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S28200
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X6CrMo17-1
Not documented
Key Differences
Can ASTM A959 S28200 Be Substituted With EN 10088-1 X6CrMo17-1?
ASTM A959 S28200 and EN 10088-1 X6CrMo17-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S28200
0 active listings and RFQs →
EN 10088-1 X6CrMo17-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S28200 and EN 10088-1 X6CrMo17-1?
ASTM A959 S28200 specifies Cu, N which are not specified for EN 10088-1 X6CrMo17-1.
Can ASTM A959 S28200 be substituted with EN 10088-1 X6CrMo17-1?
ASTM A959 S28200 and EN 10088-1 X6CrMo17-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.