Post Stock Login Register

ASTM A959 S30415 vs ASTM A276/A276M S30451

Close Alternative — 72.4% match based on chemical composition and mechanical property overlap.

ASTM A959 S30415 (ASTM A959:2011) and ASTM A276/A276M S30451 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S30415 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A276/A276M S30451 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). ASTM A959 S30415 is defined under ASTM International, originating from United States, while ASTM A276/A276M S30451 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S30415 vs ASTM A276/A276M S30451 is a 72.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.4%.

Frequently Compared With ASTM A959 S30415:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
72.4%
MECHANICAL MATCH
No shared data
OVERALL
72.4%
Specifications
Property ASTM A959 S30415 ASTM A276/A276M S30451
Standard ASTM A959:2011 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) 0.04-0.06 <=0.08
Ce (%) 0.03-0.08 Not specified
Cr (%) 18.0-19.0 18.0-20.0
Mn (%) <=0.80 <=2.00
N (%) 0.12-0.18 0.10-0.16
Ni (%) 9.0-10.0 8.0-11.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) 1.00-2.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 S30415 ASTM A276/A276M S30451
Tensile Strength Not specified >=550 MPa
Yield Strength Not specified >=240 MPa
Elongation Not specified >=30%
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
ASTM A959 S30415
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A276/A276M S30451
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can ASTM A959 S30415 Be Substituted With ASTM A276/A276M S30451?
ASTM A959 S30415 and ASTM A276/A276M S30451 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 S30415
0 active listings and RFQs →
ASTM A276/A276M S30451
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S30415 and ASTM A276/A276M S30451?
ASTM A959 S30415 specifies Ce which is not specified for ASTM A276/A276M S30451.
Can ASTM A959 S30415 be substituted with ASTM A276/A276M S30451?
ASTM A959 S30415 and ASTM A276/A276M S30451 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.