Post Stock Login Register

ASTM A959 S30415 vs ASTM A959 304N

Close Alternative — 72.4% match based on chemical composition and mechanical property overlap.

ASTM A959 S30415 (ASTM A959:2011) and ASTM A959 304N (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S30415 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 304N is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S30415 is defined under ASTM International, originating from United States, while ASTM A959 304N is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S30415 vs ASTM A959 304N is a 72.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.4%.

Frequently Compared With ASTM A959 S30415:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
72.4%
MECHANICAL MATCH
No shared data
OVERALL
72.4%
Specifications
Property ASTM A959 S30415 ASTM A959 304N
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.04-0.06 <=0.08
Ce (%) 0.03-0.08 Not specified
Cr (%) 18.0-19.0 18.0-20.0
Mn (%) <=0.80 <=2.00
N (%) 0.12-0.18 0.10-0.16
Ni (%) 9.0-10.0 8.0-11.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) 1.00-2.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S30415
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 304N
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S30415 Be Substituted With ASTM A959 304N?
ASTM A959 S30415 and ASTM A959 304N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 S30415
0 active listings and RFQs →
ASTM A959 304N
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S30415 and ASTM A959 304N?
ASTM A959 S30415 specifies Ce which is not specified for ASTM A959 304N.
Can ASTM A959 S30415 be substituted with ASTM A959 304N?
ASTM A959 S30415 and ASTM A959 304N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.