Post Stock Login Register

ASTM A959 S31002 vs ASTM A959 29-4-2

Related Material — 58.6% match based on chemical composition and mechanical property overlap.

ASTM A959 S31002 (ASTM A959:2011) and ASTM A959 29-4-2 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S31002 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 29-4-2 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S31002 is defined under ASTM International, originating from United States, while ASTM A959 29-4-2 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S31002 vs ASTM A959 29-4-2 is a 58.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 58.6%.

Frequently Compared With ASTM A959 S31002:
ASTM A959 29-4 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 ASTM A959 25-4-4 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
58.6%
MECHANICAL MATCH
No shared data
OVERALL
58.6%
Specifications
Property ASTM A959 S31002 ASTM A959 29-4-2
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.015 <=0.010
Cr (%) 24.0-26.0 28.0-30.0
Mn (%) <=2.00 <=0.30
Mo (%) <=0.10 3.5-4.2
N (%) <=0.10 <=0.020
Ni (%) 19.0-22.0 2.00-2.50
P (%) <=0.020 <=0.025
S (%) <=0.015 <=0.020
Si (%) <=0.15 <=0.20
Cu (%) Not specified <=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S31002
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 29-4-2
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S31002 Be Substituted With ASTM A959 29-4-2?
ASTM A959 S31002 and ASTM A959 29-4-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S31002
0 active listings and RFQs →
ASTM A959 29-4-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S31002 and ASTM A959 29-4-2?
ASTM A959 29-4-2 specifies Cu which is not specified for ASTM A959 S31002.
Can ASTM A959 S31002 be substituted with ASTM A959 29-4-2?
ASTM A959 S31002 and ASTM A959 29-4-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.