Post Stock Login Register

ASTM A959 S31260 vs ASTM A959 S32506

Close Alternative — 82.7% match based on chemical composition and mechanical property overlap.

ASTM A959 S31260 (ASTM A959:2011) and ASTM A959 S32506 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S31260 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S32506 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S31260 is defined under ASTM International, originating from United States, while ASTM A959 S32506 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S31260 vs ASTM A959 S32506 is a 82.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 82.7%.

Frequently Compared With ASTM A959 S31260:
ASTM A959 2507 ASTM A959 255 GOST 5632 08X18H10 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
82.7%
MECHANICAL MATCH
No shared data
OVERALL
82.7%
Specifications
Property ASTM A959 S31260 ASTM A959 S32506
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 24.0-26.0 24.0-26.0
Cu (%) 0.20-0.80 Not specified
Mn (%) <=1.00 <=1.00
Mo (%) 2.5-3.5 3.0-3.5
N (%) 0.10-0.30 0.08-0.20
Ni (%) 5.5-7.5 5.5-7.2
P (%) <=0.030 <=0.040
S (%) <=0.030 <=0.015
Si (%) <=0.75 <=0.90
W (%) 0.10-0.50 0.05-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S31260
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S32506
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S31260 Be Substituted With ASTM A959 S32506?
ASTM A959 S31260 and ASTM A959 S32506 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 S31260
0 active listings and RFQs →
ASTM A959 S32506
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S31260 and ASTM A959 S32506?
ASTM A959 S31260 specifies Cu which is not specified for ASTM A959 S32506.
Can ASTM A959 S31260 be substituted with ASTM A959 S32506?
ASTM A959 S31260 and ASTM A959 S32506 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.