Post Stock Login Register

ASTM A959 S31272 vs EN 10088-1 X5CrNiMoTi15-2

Related Material — 56.5% match based on chemical composition and mechanical property overlap.

ASTM A959 S31272 (ASTM A959:2011) and EN 10088-1 X5CrNiMoTi15-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S31272 is defined under ASTM International, originating from United States, while EN 10088-1 X5CrNiMoTi15-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S31272 vs EN 10088-1 X5CrNiMoTi15-2 is a 56.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 56.5%.

Frequently Compared With ASTM A959 S31272:
IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
56.5%
MECHANICAL MATCH
No shared data
OVERALL
56.5%
Specifications
Property ASTM A959 S31272 EN 10088-1 X5CrNiMoTi15-2
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
B (%) 0.004-0.008 Not specified
C (%) 0.08-0.12 <=0.08
Cr (%) 14.0-16.0 13.5-15.5
Mn (%) 1.50-2.00 <=1.00
Mo (%) 1.00-1.40 0.20-1.20
Ni (%) 14.0-16.0 1.00-2.50
P (%) <=0.030 <=0.040
S (%) <=0.015 <=0.015
Si (%) 0.30-0.70 <=1.00
Ti (%) 0.30-0.60 0.30-0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S31272
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X5CrNiMoTi15-2
Not documented
Key Differences
Can ASTM A959 S31272 Be Substituted With EN 10088-1 X5CrNiMoTi15-2?
ASTM A959 S31272 and EN 10088-1 X5CrNiMoTi15-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S31272
0 active listings and RFQs →
EN 10088-1 X5CrNiMoTi15-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S31272 and EN 10088-1 X5CrNiMoTi15-2?
ASTM A959 S31272 specifies B which is not specified for EN 10088-1 X5CrNiMoTi15-2.
Can ASTM A959 S31272 be substituted with EN 10088-1 X5CrNiMoTi15-2?
ASTM A959 S31272 and EN 10088-1 X5CrNiMoTi15-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.