Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
ASTM A959 S31500 (ASTM A959:2011) and EN 10088-1 X2CrNiMo17-12-3 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 S31500 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMo17-12-3 is defined under European Standard (EN), originating from Europe.
As per chemical composition, ASTM A959 S31500 vs EN 10088-1 X2CrNiMo17-12-3 is a 71% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S31500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X2CrNiMo17-12-3
Not documented
Can ASTM A959 S31500 Be Substituted With EN 10088-1 X2CrNiMo17-12-3?
ASTM A959 S31500 and EN 10088-1 X2CrNiMo17-12-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between ASTM A959 S31500 and EN 10088-1 X2CrNiMo17-12-3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S31500 be substituted with EN 10088-1 X2CrNiMo17-12-3?
ASTM A959 S31500 and EN 10088-1 X2CrNiMo17-12-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.