Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
ASTM A959 S31500 (ASTM A959:2011) and IS 6603 X02Cr18Ni14Mo3 (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 S31500 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while IS 6603 X02Cr18Ni14Mo3 is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars.
ASTM A959 S31500 is defined under ASTM International, originating from United States, while IS 6603 X02Cr18Ni14Mo3 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, ASTM A959 S31500 vs IS 6603 X02Cr18Ni14Mo3 is a 73.5% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A959 S31500
IS 6603 X02Cr18Ni14Mo3
Tensile Strength
Not specified
500-700 MPa
Yield Strength
Not specified
>=200 MPa
Elongation
Not specified
>=40%
Condition
Not specified
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
ASTM A959 S31500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
IS 6603 X02Cr18Ni14Mo3
General purposes, semi-finished products, bars, wire rods and bright bars
Can ASTM A959 S31500 Be Substituted With IS 6603 X02Cr18Ni14Mo3?
ASTM A959 S31500 and IS 6603 X02Cr18Ni14Mo3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between ASTM A959 S31500 and IS 6603 X02Cr18Ni14Mo3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S31500 be substituted with IS 6603 X02Cr18Ni14Mo3?
ASTM A959 S31500 and IS 6603 X02Cr18Ni14Mo3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.