Post Stock Login Register

ASTM A959 S32001 vs ASTM A959 26-3-3

Related Material — 67.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S32001 (ASTM A959:2011) and ASTM A959 26-3-3 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S32001 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 26-3-3 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S32001 is defined under ASTM International, originating from United States, while ASTM A959 26-3-3 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S32001 vs ASTM A959 26-3-3 is a 67.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.9%.

Frequently Compared With ASTM A959 S32001:
ASTM A959 2304 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
67.9%
MECHANICAL MATCH
No shared data
OVERALL
67.9%
Specifications
Property ASTM A959 S32001 ASTM A959 26-3-3
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 19.5-21.5 25.0-28.0
Cu (%) <=1.00 Not specified
Mn (%) 4.0-6.0 <=1.00
Mo (%) <=0.60 3.0-4.0
N (%) 0.05-0.17 <=0.040
Ni (%) 1.00-3.00 1.0-3.5
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S32001
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 26-3-3
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S32001 Be Substituted With ASTM A959 26-3-3?
ASTM A959 S32001 and ASTM A959 26-3-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S32001
0 active listings and RFQs →
ASTM A959 26-3-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S32001 and ASTM A959 26-3-3?
ASTM A959 S32001 specifies Cu which is not specified for ASTM A959 26-3-3.
Can ASTM A959 S32001 be substituted with ASTM A959 26-3-3?
ASTM A959 S32001 and ASTM A959 26-3-3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.