Post Stock Login Register

ASTM A959 S32003 vs ASTM A959 317LM

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S32003 (ASTM A959:2011) and ASTM A959 317LM (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S32003 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 317LM is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S32003 is defined under ASTM International, originating from United States, while ASTM A959 317LM is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S32003 vs ASTM A959 317LM is a 70.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 S32003:
ASTM A959 2205 GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10
Match Breakdown
CHEMISTRY MATCH
70.2%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 S32003 ASTM A959 317LM
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 19.5-22.5 18.0-20.0
Mn (%) <=2.00 <=2.00
Mo (%) 1.50-2.00 4.0-5.0
N (%) 0.14-0.20 <=0.20
Ni (%) 3.0-4.0 13.5-17.5
P (%) <=0.030 <=0.045
S (%) <=0.020 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S32003
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 317LM
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A959 S32003 Be Substituted With ASTM A959 317LM?
ASTM A959 S32003 and ASTM A959 317LM share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S32003
0 active listings and RFQs →
ASTM A959 317LM
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S32003 and ASTM A959 317LM?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S32003 be substituted with ASTM A959 317LM?
ASTM A959 S32003 and ASTM A959 317LM share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.