ASTM A959:2011 S32803: Ferritic stainless steel grade (UNS S32803) with the composition limits of ASTM A959-11. Carbon up to 0.015% and chromium 28.0-29.0%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Cb
Cr
Mn
Mo
N
Ni
P
S
Si
<=0.015
0.15-0.50
28.0-29.0
<=0.50
1.80-2.50
<=0.020
3.0-4.0
<=0.020
<=0.005
<=0.55
More data from ASTM A959:2011
From the standard
Other composition limitsfrom Table 1 and its footnotes
UNS number
S32803
Metallurgical class
Ferritic grade: body-centered cubic, little or no tempered martensite, hardenable only slightly by cold working
Type
No type number is printed; the grade is identified by its UNS number only
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
Cb 0.15-0.50, 12x (C+N) min-(C+N) 0.030
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes
Active ASTM A959:2011 S32803 Listings on M-EX (For Sale)