Post Stock Login Register

ASTM A959 S33228 vs EN 10088-1 X6NiCrNbCe32-27

Strong Match — 90.7% match based on chemical composition and mechanical property overlap.

ASTM A959 S33228 (ASTM A959:2011) and EN 10088-1 X6NiCrNbCe32-27 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S33228 is defined under ASTM International, originating from United States, while EN 10088-1 X6NiCrNbCe32-27 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S33228 vs EN 10088-1 X6NiCrNbCe32-27 is a 90.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.7%.

Frequently Compared With ASTM A959 S33228:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
90.7%
MECHANICAL MATCH
No shared data
OVERALL
90.7%
Specifications
Property ASTM A959 S33228 EN 10088-1 X6NiCrNbCe32-27
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
Al (%) <=0.025 <=0.025
C (%) 0.04-0.08 0.04-0.08
Cb (%) 0.60-1.00 Not specified
Ce (%) 0.05-0.10 0.05-0.10
Cr (%) 26.0-28.0 26.0-28.0
Mn (%) <=1.00 <=1.00
Ni (%) 31.0-33.0 31.0-33.0
P (%) <=0.020 <=0.020
S (%) <=0.015 <=0.010
Si (%) <=0.30 <=0.30
N (%) Not specified <=0.10
Nb (%) Not specified 0.60-1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S33228
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X6NiCrNbCe32-27
Not documented
Key Differences
Can ASTM A959 S33228 Be Substituted With EN 10088-1 X6NiCrNbCe32-27?
ASTM A959 S33228 and EN 10088-1 X6NiCrNbCe32-27 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6NiCrNbCe32-27 is often considered as a substitute for ASTM A959 S33228 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S33228
0 active listings and RFQs →
EN 10088-1 X6NiCrNbCe32-27
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S33228 and EN 10088-1 X6NiCrNbCe32-27?
ASTM A959 S33228 specifies Cb which is not specified for EN 10088-1 X6NiCrNbCe32-27. EN 10088-1 X6NiCrNbCe32-27 specifies N, Nb which are not specified for ASTM A959 S33228.
Can ASTM A959 S33228 be substituted with EN 10088-1 X6NiCrNbCe32-27?
ASTM A959 S33228 and EN 10088-1 X6NiCrNbCe32-27 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6NiCrNbCe32-27 is often considered as a substitute for ASTM A959 S33228 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.