Post Stock Login Register

ASTM A959 S34565 vs IS 6603 X02Cr25Ni18Mn6Mo4N

Strong Match — 86.1% match based on chemical composition and mechanical property overlap.

ASTM A959 S34565 (ASTM A959:2011) and IS 6603 X02Cr25Ni18Mn6Mo4N (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S34565 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while IS 6603 X02Cr25Ni18Mn6Mo4N is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars. ASTM A959 S34565 is defined under ASTM International, originating from United States, while IS 6603 X02Cr25Ni18Mn6Mo4N is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A959 S34565 vs IS 6603 X02Cr25Ni18Mn6Mo4N is a 86.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.1%.

Frequently Compared With ASTM A959 S34565:
EN 10088-1 1.4301 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 2507
Match Breakdown
CHEMISTRY MATCH
86.1%
MECHANICAL MATCH
No shared data
OVERALL
86.1%
Specifications
Property ASTM A959 S34565 IS 6603 X02Cr25Ni18Mn6Mo4N
Standard ASTM A959:2011 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cb (%) <=0.10 Not specified
Cr (%) 23.0-25.0 24.0-26.0
Mn (%) 5.0-7.0 5.0-7.0
Mo (%) 4.0-5.0 4.0-5.0
N (%) 0.40-0.60 0.30-0.60
Ni (%) 16.0-18.0 16.0-19.0
P (%) <=0.030 <=0.030
S (%) <=0.010 <=0.010
Si (%) <=1.00 <=1.00
Nb (%) Not specified <=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 S34565 IS 6603 X02Cr25Ni18Mn6Mo4N
Tensile Strength Not specified 800-1000 MPa
Yield Strength Not specified >=420 MPa
Elongation Not specified >=35%
Condition Not specified Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
ASTM A959 S34565
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
IS 6603 X02Cr25Ni18Mn6Mo4N
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
Can ASTM A959 S34565 Be Substituted With IS 6603 X02Cr25Ni18Mn6Mo4N?
ASTM A959 S34565 and IS 6603 X02Cr25Ni18Mn6Mo4N overlap closely enough on chemistry and mechanical properties that IS 6603 X02Cr25Ni18Mn6Mo4N is often considered as a substitute for ASTM A959 S34565 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S34565
0 active listings and RFQs →
IS 6603 X02Cr25Ni18Mn6Mo4N
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S34565 and IS 6603 X02Cr25Ni18Mn6Mo4N?
ASTM A959 S34565 specifies Cb which is not specified for IS 6603 X02Cr25Ni18Mn6Mo4N. IS 6603 X02Cr25Ni18Mn6Mo4N specifies Nb which is not specified for ASTM A959 S34565.
Can ASTM A959 S34565 be substituted with IS 6603 X02Cr25Ni18Mn6Mo4N?
ASTM A959 S34565 and IS 6603 X02Cr25Ni18Mn6Mo4N overlap closely enough on chemistry and mechanical properties that IS 6603 X02Cr25Ni18Mn6Mo4N is often considered as a substitute for ASTM A959 S34565 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.