Post Stock Login Register

ASTM A959 S35315 vs ASTM A959 SS310

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S35315 (ASTM A959:2011) and ASTM A959 SS310 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S35315 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 SS310 is commonly used for furnace parts, heat exchangers, kiln components. ASTM A959 S35315 is defined under ASTM International, originating from United States, while ASTM A959 SS310 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S35315 vs ASTM A959 SS310 is a 74.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 S35315:
EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
74.4%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 S35315 ASTM A959 SS310
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 <=0.25
Ce (%) 0.03-0.10 Not specified
Cr (%) 24.0-26.0 24.0-26.0
Mn (%) <=2.00 <=2.00
N (%) 0.12-0.18 Not specified
Ni (%) 34.0-36.0 19.0-22.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) 1.20-2.00 <=1.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S35315
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 SS310
Furnace parts, heat exchangers, kiln components
Key Differences
Can ASTM A959 S35315 Be Substituted With ASTM A959 SS310?
ASTM A959 S35315 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 S35315
No active listings currently.
ASTM A959 SS310
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3000–3500 mm (118.11–137.8 in)
On M-EX Right Now
ASTM A959 S35315
0 active listings and RFQs →
ASTM A959 SS310
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S35315 and ASTM A959 SS310?
ASTM A959 S35315 specifies Ce, N which are not specified for ASTM A959 SS310.
Can ASTM A959 S35315 be substituted with ASTM A959 SS310?
ASTM A959 S35315 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.