Post Stock Login Register

ASTM A959 S39277 vs ASTM A959 25-4-4

Related Material — 65% match based on chemical composition and mechanical property overlap.

ASTM A959 S39277 (ASTM A959:2011) and ASTM A959 25-4-4 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S39277 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 25-4-4 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S39277 is defined under ASTM International, originating from United States, while ASTM A959 25-4-4 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S39277 vs ASTM A959 25-4-4 is a 65% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With ASTM A959 S39277:
ASTM A959 2507 ASTM A959 .- EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 255 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
65%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property ASTM A959 S39277 ASTM A959 25-4-4
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.025
Cr (%) 24.0-26.0 24.5-26.0
Cu (%) 1.20-2.00 Not specified
Mn (%) <=0.80 <=1.00
Mo (%) 3.0-4.0 3.5-4.5
N (%) 0.23-0.33 <=0.035
Ni (%) 6.5-8.0 3.5-4.5
P (%) <=0.025 <=0.040
S (%) <=0.002 <=0.030
Si (%) <=0.80 <=0.75
W (%) 0.80-1.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S39277
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 25-4-4
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S39277 Be Substituted With ASTM A959 25-4-4?
ASTM A959 S39277 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S39277
0 active listings and RFQs →
ASTM A959 25-4-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S39277 and ASTM A959 25-4-4?
ASTM A959 S39277 specifies Cu, W which are not specified for ASTM A959 25-4-4.
Can ASTM A959 S39277 be substituted with ASTM A959 25-4-4?
ASTM A959 S39277 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.