Post Stock Login Register

ASTM A959 S39277 vs ASTM A959 S32760

Close Alternative — 82.3% match based on chemical composition and mechanical property overlap.

ASTM A959 S39277 (ASTM A959:2011) and ASTM A959 S32760 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S39277 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S32760 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S39277 is defined under ASTM International, originating from United States, while ASTM A959 S32760 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S39277 vs ASTM A959 S32760 is a 82.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 82.3%.

Frequently Compared With ASTM A959 S39277:
ASTM A959 2507 ASTM A959 .- EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 255 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
82.3%
MECHANICAL MATCH
No shared data
OVERALL
82.3%
Specifications
Property ASTM A959 S39277 ASTM A959 S32760
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.025 <=0.030
Cr (%) 24.0-26.0 24.0-26.0
Cu (%) 1.20-2.00 0.50-1.00
Mn (%) <=0.80 <=1.00
Mo (%) 3.0-4.0 3.0-4.0
N (%) 0.23-0.33 0.20-0.30
Ni (%) 6.5-8.0 6.0-8.0
P (%) <=0.025 <=0.030
S (%) <=0.002 <=0.010
Si (%) <=0.80 <=1.00
W (%) 0.80-1.20 0.50-1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S39277
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S32760
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A959 S39277 Be Substituted With ASTM A959 S32760?
ASTM A959 S39277 and ASTM A959 S32760 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 S39277
0 active listings and RFQs →
ASTM A959 S32760
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S39277 and ASTM A959 S32760?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S39277 be substituted with ASTM A959 S32760?
ASTM A959 S39277 and ASTM A959 S32760 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.