Post Stock Login Register

ASTM A959 S40930 vs ASTM A959 S40910

Strong Match — 100% match based on chemical composition and mechanical property overlap.

ASTM A959 S40930 (ASTM A959:2011) and ASTM A959 S40910 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S40930 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S40910 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S40930 is defined under ASTM International, originating from United States, while ASTM A959 S40910 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S40930 vs ASTM A959 S40910 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With ASTM A959 S40930:
ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property ASTM A959 S40930 ASTM A959 S40910
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 10.5-11.7 10.5-11.7
Mn (%) <=1.00 <=1.00
N (%) <=0.030 <=0.030
Ni (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.020 <=0.020
Si (%) <=1.00 <=1.00
Cb (%) Not specified <=0.17
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S40930
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S40910
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S40930 Be Substituted With ASTM A959 S40910?
ASTM A959 S40930 and ASTM A959 S40910 overlap closely enough on chemistry and mechanical properties that ASTM A959 S40910 is often considered as a substitute for ASTM A959 S40930 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S40930
0 active listings and RFQs →
ASTM A959 S40910
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S40930 and ASTM A959 S40910?
ASTM A959 S40910 specifies Cb which is not specified for ASTM A959 S40930.
Can ASTM A959 S40930 be substituted with ASTM A959 S40910?
ASTM A959 S40930 and ASTM A959 S40910 overlap closely enough on chemistry and mechanical properties that ASTM A959 S40910 is often considered as a substitute for ASTM A959 S40930 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.