Post Stock Login Register

ASTM A959 S42010 vs ASTM A276/A276M S42010

Strong Match — 100% match based on chemical composition and mechanical property overlap.

ASTM A959 S42010 (ASTM A959:2011) and ASTM A276/A276M S42010 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S42010 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A276/A276M S42010 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). ASTM A959 S42010 is defined under ASTM International, originating from United States, while ASTM A276/A276M S42010 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S42010 vs ASTM A276/A276M S42010 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With ASTM A959 S42010:
IS 1570 (Part 7) 20Cr12MoNiVH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property ASTM A959 S42010 ASTM A276/A276M S42010
Standard ASTM A959:2011 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) 0.15-0.30 0.15-0.30
Cr (%) 13.5-15.0 13.5-15.0
Mn (%) <=1.00 <=1.00
Mo (%) 0.40-0.85 0.40-0.85
Ni (%) 0.35-0.85 0.35-0.85
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 S42010 ASTM A276/A276M S42010
Hardness Not specified <=235 HB
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
ASTM A959 S42010
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A276/A276M S42010
Stainless steel bars and shapes (hot-finished or cold-finished)
Can ASTM A959 S42010 Be Substituted With ASTM A276/A276M S42010?
ASTM A959 S42010 and ASTM A276/A276M S42010 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S42010 is often considered as a substitute for ASTM A959 S42010 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S42010
0 active listings and RFQs →
ASTM A276/A276M S42010
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S42010 and ASTM A276/A276M S42010?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S42010 be substituted with ASTM A276/A276M S42010?
ASTM A959 S42010 and ASTM A276/A276M S42010 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S42010 is often considered as a substitute for ASTM A959 S42010 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.