Post Stock Login Register

ASTM A959 S45503 vs ASTM A959 S46910

Related Material — 62.8% match based on chemical composition and mechanical property overlap.

ASTM A959 S45503 (ASTM A959:2011) and ASTM A959 S46910 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S45503 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S46910 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S45503 is defined under ASTM International, originating from United States, while ASTM A959 S46910 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S45503 vs ASTM A959 S46910 is a 62.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.8%.

Frequently Compared With ASTM A959 S45503:
EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 29-4 ASTM A959 29-4-2
Match Breakdown
CHEMISTRY MATCH
62.8%
MECHANICAL MATCH
No shared data
OVERALL
62.8%
Specifications
Property ASTM A959 S45503 ASTM A959 S46910
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.030
Cb (%) 0.10-0.50 Not specified
Cr (%) 11.0-12.5 11.0-13.0
Cu (%) 1.50-2.50 1.5-3.5
Mn (%) <=0.50 <=1.00
Mo (%) <=0.50 3.5-5.0
Ni (%) 7.5-9.5 8.0-10.0
P (%) <=0.010 <=0.030
S (%) <=0.010 <=0.015
Si (%) <=0.20 <=0.70
Ti (%) 1.00-1.35 0.50-1.20
Al (%) Not specified 0.15-0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S45503
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S46910
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S45503 Be Substituted With ASTM A959 S46910?
ASTM A959 S45503 and ASTM A959 S46910 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S45503
0 active listings and RFQs →
ASTM A959 S46910
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S45503 and ASTM A959 S46910?
ASTM A959 S45503 specifies Cb which is not specified for ASTM A959 S46910. ASTM A959 S46910 specifies Al which is not specified for ASTM A959 S45503.
Can ASTM A959 S45503 be substituted with ASTM A959 S46910?
ASTM A959 S45503 and ASTM A959 S46910 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.