Post Stock Login Register

ASTM A959 S46500 vs ASTM A959 S45503

Related Material — 61.6% match based on chemical composition and mechanical property overlap.

ASTM A959 S46500 (ASTM A959:2011) and ASTM A959 S45503 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S46500 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S45503 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S46500 is defined under ASTM International, originating from United States, while ASTM A959 S45503 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S46500 vs ASTM A959 S45503 is a 61.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 61.6%.

Frequently Compared With ASTM A959 S46500:
ASTM A959 29-4-2 ASTM A959 29-4 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006
Match Breakdown
CHEMISTRY MATCH
61.6%
MECHANICAL MATCH
No shared data
OVERALL
61.6%
Specifications
Property ASTM A959 S46500 ASTM A959 S45503
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.010
Cr (%) 11.0-12.5 11.0-12.5
Mn (%) <=0.25 <=0.50
Mo (%) 0.75-1.25 <=0.50
N (%) <=0.010 Not specified
Ni (%) 10.7-11.3 7.5-9.5
P (%) <=0.015 <=0.010
S (%) <=0.010 <=0.010
Si (%) <=0.25 <=0.20
Ti (%) 1.50-1.80 1.00-1.35
Cb (%) Not specified 0.10-0.50
Cu (%) Not specified 1.50-2.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S46500
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S45503
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S46500 Be Substituted With ASTM A959 S45503?
ASTM A959 S46500 and ASTM A959 S45503 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S46500
0 active listings and RFQs →
ASTM A959 S45503
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S46500 and ASTM A959 S45503?
ASTM A959 S46500 specifies N which is not specified for ASTM A959 S45503. ASTM A959 S45503 specifies Cb, Cu which are not specified for ASTM A959 S46500.
Can ASTM A959 S46500 be substituted with ASTM A959 S45503?
ASTM A959 S46500 and ASTM A959 S45503 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.