Post Stock Login Register

ASTM A959 S46910 vs ASTM A959 25-4-4

Related Material — 63.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S46910 (ASTM A959:2011) and ASTM A959 25-4-4 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S46910 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 25-4-4 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S46910 is defined under ASTM International, originating from United States, while ASTM A959 25-4-4 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S46910 vs ASTM A959 25-4-4 is a 63.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 63.9%.

Frequently Compared With ASTM A959 S46910:
GOST 5632 06Kh23N28 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 ASTM A959 2507 ASTM A959 29-4C
Match Breakdown
CHEMISTRY MATCH
63.9%
MECHANICAL MATCH
No shared data
OVERALL
63.9%
Specifications
Property ASTM A959 S46910 ASTM A959 25-4-4
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
Al (%) 0.15-0.50 Not specified
C (%) <=0.030 <=0.025
Cr (%) 11.0-13.0 24.5-26.0
Cu (%) 1.5-3.5 Not specified
Mn (%) <=1.00 <=1.00
Mo (%) 3.5-5.0 3.5-4.5
Ni (%) 8.0-10.0 3.5-4.5
P (%) <=0.030 <=0.040
S (%) <=0.015 <=0.030
Si (%) <=0.70 <=0.75
Ti (%) 0.50-1.20 Not specified
N (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S46910
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 25-4-4
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 S46910 Be Substituted With ASTM A959 25-4-4?
ASTM A959 S46910 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S46910
0 active listings and RFQs →
ASTM A959 25-4-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S46910 and ASTM A959 25-4-4?
ASTM A959 S46910 specifies Al, Cu, Ti which are not specified for ASTM A959 25-4-4. ASTM A959 25-4-4 specifies N which is not specified for ASTM A959 S46910.
Can ASTM A959 S46910 be substituted with ASTM A959 25-4-4?
ASTM A959 S46910 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.