Post Stock Login Register

ASTM A959 XM-12 vs ASTM A276/A276M S43100

Close Alternative — 76.5% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-12 (ASTM A959:2011) and ASTM A276/A276M S43100 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-12 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A276/A276M S43100 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). ASTM A959 XM-12 is defined under ASTM International, originating from United States, while ASTM A276/A276M S43100 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-12 vs ASTM A276/A276M S43100 is a 76.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 76.5%.

Frequently Compared With ASTM A959 XM-12:
IS 1570 (Part 7) 12Cr13H ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
76.5%
MECHANICAL MATCH
No shared data
OVERALL
76.5%
Specifications
Property ASTM A959 XM-12 ASTM A276/A276M S43100
Standard ASTM A959:2011 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.20
Cb (%) 0.15-0.45 Not specified
Cr (%) 14.0-15.5 15.0-17.0
Cu (%) 2.5-4.5 Not specified
Mn (%) <=1.00 <=1.00
Ni (%) 3.5-5.5 1.25-2.50
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 XM-12 ASTM A276/A276M S43100
Hardness Not specified <=285 HB
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
ASTM A959 XM-12
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A276/A276M S43100
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can ASTM A959 XM-12 Be Substituted With ASTM A276/A276M S43100?
ASTM A959 XM-12 and ASTM A276/A276M S43100 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 XM-12
0 active listings and RFQs →
ASTM A276/A276M S43100
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-12 and ASTM A276/A276M S43100?
ASTM A959 XM-12 specifies Cb, Cu which are not specified for ASTM A276/A276M S43100.
Can ASTM A959 XM-12 be substituted with ASTM A276/A276M S43100?
ASTM A959 XM-12 and ASTM A276/A276M S43100 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.