Post Stock Login Register

ASTM A959 XM-13 vs ASTM A959 310MoLN

Related Material — 59.4% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-13 (ASTM A959:2011) and ASTM A959 310MoLN (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-13 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 310MoLN is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 XM-13 is defined under ASTM International, originating from United States, while ASTM A959 310MoLN is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-13 vs ASTM A959 310MoLN is a 59.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.4%.

Frequently Compared With ASTM A959 XM-13:
ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
59.4%
MECHANICAL MATCH
No shared data
OVERALL
59.4%
Specifications
Property ASTM A959 XM-13 ASTM A959 310MoLN
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
Al (%) 0.90-1.35 Not specified
C (%) <=0.05 <=0.030
Cr (%) 12.3-13.2 24.0-26.0
Mn (%) <=0.20 <=2.00
Mo (%) 2.00-3.00 2.00-3.00
N (%) <=0.01 0.10-0.16
Ni (%) 7.5-8.5 21.0-23.0
P (%) <=0.010 <=0.030
S (%) <=0.008 <=0.015
Si (%) <=0.10 <=0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-13
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 310MoLN
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 XM-13 Be Substituted With ASTM A959 310MoLN?
ASTM A959 XM-13 and ASTM A959 310MoLN share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-13
0 active listings and RFQs →
ASTM A959 310MoLN
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-13 and ASTM A959 310MoLN?
ASTM A959 XM-13 specifies Al which is not specified for ASTM A959 310MoLN.
Can ASTM A959 XM-13 be substituted with ASTM A959 310MoLN?
ASTM A959 XM-13 and ASTM A959 310MoLN share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.