Post Stock Login Register

ASTM A959 XM-13 vs EN 10088-1 X1CrNiMoAlTi12-9-2

Related Material — 59.1% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-13 (ASTM A959:2011) and EN 10088-1 X1CrNiMoAlTi12-9-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-13 is defined under ASTM International, originating from United States, while EN 10088-1 X1CrNiMoAlTi12-9-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 XM-13 vs EN 10088-1 X1CrNiMoAlTi12-9-2 is a 59.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.1%.

Frequently Compared With ASTM A959 XM-13:
ASTM A959 .- EN 10088-1 1.4401 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
59.1%
MECHANICAL MATCH
No shared data
OVERALL
59.1%
Specifications
Property ASTM A959 XM-13 EN 10088-1 X1CrNiMoAlTi12-9-2
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
Al (%) 0.90-1.35 0.60-0.80
C (%) <=0.05 <=0.015
Cr (%) 12.3-13.2 11.5-12.5
Mn (%) <=0.20 <=0.10
Mo (%) 2.00-3.00 1.85-2.15
N (%) <=0.01 <=0.010
Ni (%) 7.5-8.5 8.5-9.5
P (%) <=0.010 <=0.010
S (%) <=0.008 <=0.005
Si (%) <=0.10 <=0.10
Ti (%) Not specified 0.28-0.37
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-13
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X1CrNiMoAlTi12-9-2
Not documented
Key Differences
Can ASTM A959 XM-13 Be Substituted With EN 10088-1 X1CrNiMoAlTi12-9-2?
ASTM A959 XM-13 and EN 10088-1 X1CrNiMoAlTi12-9-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-13
0 active listings and RFQs →
EN 10088-1 X1CrNiMoAlTi12-9-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-13 and EN 10088-1 X1CrNiMoAlTi12-9-2?
EN 10088-1 X1CrNiMoAlTi12-9-2 specifies Ti which is not specified for ASTM A959 XM-13.
Can ASTM A959 XM-13 be substituted with EN 10088-1 X1CrNiMoAlTi12-9-2?
ASTM A959 XM-13 and EN 10088-1 X1CrNiMoAlTi12-9-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.