Post Stock Login Register

ASTM A959 XM-16 vs ASTM A959 29-4C

Related Material — 60.6% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-16 (ASTM A959:2011) and ASTM A959 29-4C (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-16 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 29-4C is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 XM-16 is defined under ASTM International, originating from United States, while ASTM A959 29-4C is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-16 vs ASTM A959 29-4C is a 60.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 60.6%.

Frequently Compared With ASTM A959 XM-16:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4845 EN 10088-1 1.4401 ASTM A959 26-3-3 ASTM A959 2304
Match Breakdown
CHEMISTRY MATCH
60.6%
MECHANICAL MATCH
No shared data
OVERALL
60.6%
Specifications
Property ASTM A959 XM-16 ASTM A959 29-4C
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.03 <=0.030
Cb (%) 0.10-0.50 Not specified
Cr (%) 11.0-12.5 28.0-30.0
Cu (%) 1.50-2.50 Not specified
Mn (%) <=0.50 <=1.00
Mo (%) <=0.50 3.6-4.2
Ni (%) 7.5-9.5 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=0.50 <=1.00
Ti (%) 0.80-1.40 Not specified
N (%) Not specified <=0.045
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-16
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 29-4C
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 XM-16 Be Substituted With ASTM A959 29-4C?
ASTM A959 XM-16 and ASTM A959 29-4C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-16
0 active listings and RFQs →
ASTM A959 29-4C
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-16 and ASTM A959 29-4C?
ASTM A959 XM-16 specifies Cb, Cu, Ti which are not specified for ASTM A959 29-4C. ASTM A959 29-4C specifies N which is not specified for ASTM A959 XM-16.
Can ASTM A959 XM-16 be substituted with ASTM A959 29-4C?
ASTM A959 XM-16 and ASTM A959 29-4C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.