Post Stock Login Register

ASTM A959 XM-2 vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-2 (ASTM A959:2011) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-2 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. ASTM A959 XM-2 is defined under ASTM International (United States).

As per chemical composition, ASTM A959 XM-2 vs GOST 5632 08X18H10 is a 64.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With ASTM A959 XM-2:
ASTM A959 16-8-2H ASTM A959 .- EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
64.3%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property ASTM A959 XM-2 GOST 5632 08X18H10
Standard ASTM A959:2011 GOST 5632-2014
Category Stainless Steel Stainless Steel
Al (%) 0.60-1.00 Not specified
C (%) <=0.15 ≤0.08
Cr (%) 17.0-19.0 17.0–19.0
Mn (%) <=2.00 ≤2.00
Mo (%) 0.40-0.60 Not specified
Ni (%) 8.0-10.0 9.0–11.0
P (%) <=0.05 ≤0.035
S (%) 0.11-0.16 ≤0.020
Si (%) <=1.00 ≤0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 XM-2 GOST 5632 08X18H10
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥205 MPa
Elongation Not specified ≥40%
Typical Applications
ASTM A959 XM-2
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can ASTM A959 XM-2 Be Substituted With GOST 5632 08X18H10?
ASTM A959 XM-2 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 XM-2
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
ASTM A959 XM-2
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-2 and GOST 5632 08X18H10?
ASTM A959 XM-2 specifies Al, Mo which are not specified for GOST 5632 08X18H10.
Can ASTM A959 XM-2 be substituted with GOST 5632 08X18H10?
ASTM A959 XM-2 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.