Post Stock Login Register

ASTM A959 XM-26 vs ASTM A959 SS310

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-26 (ASTM A959:2011) and ASTM A959 SS310 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-26 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 SS310 is commonly used for furnace parts, heat exchangers, kiln components. ASTM A959 XM-26 is defined under ASTM International, originating from United States, while ASTM A959 SS310 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-26 vs ASTM A959 SS310 is a 70.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 XM-26:
ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4006 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
70.7%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 XM-26 ASTM A959 SS310
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.06 <=0.25
Cr (%) 25.0-27.0 24.0-26.0
Mn (%) <=1.00 <=2.00
Ni (%) 6.0-7.0 19.0-22.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.50
Ti (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-26
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 SS310
Furnace parts, heat exchangers, kiln components
Key Differences
Can ASTM A959 XM-26 Be Substituted With ASTM A959 SS310?
ASTM A959 XM-26 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 XM-26
No active listings currently.
ASTM A959 SS310
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3000–3500 mm (118.11–137.8 in)
On M-EX Right Now
ASTM A959 XM-26
0 active listings and RFQs →
ASTM A959 SS310
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-26 and ASTM A959 SS310?
ASTM A959 XM-26 specifies Ti which is not specified for ASTM A959 SS310.
Can ASTM A959 XM-26 be substituted with ASTM A959 SS310?
ASTM A959 XM-26 and ASTM A959 SS310 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.