Post Stock Login Register

ASTM A959 XM-26 vs SAE 30304

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-26 (ASTM A959:2011) and SAE 30304 (SAE J405) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-26 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while SAE 30304 is commonly used for used for chemical equipment, food processing machinery, architectural panels, fasteners, pressure vessels, and heat exchangers.. ASTM A959 XM-26 is defined under ASTM International, originating from United States, while SAE 30304 is defined under SAE International, originating from United States.

As per chemical composition, ASTM A959 XM-26 vs SAE 30304 is a 72.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 XM-26:
ASTM A959 .- EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
72.6%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 XM-26 SAE 30304
Standard ASTM A959:2011 SAE J405
Category Stainless Steel Stainless Steel
C (%) <=0.06 0.08 max
Cr (%) 25.0-27.0 18.00-20.00
Mn (%) <=1.00 2.00 max
Ni (%) 6.0-7.0 8.00-10.50
P (%) <=0.045 0.045 max
S (%) <=0.030 0.030 max
Si (%) <=1.00 0.75 max
Ti (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 XM-26 SAE 30304
Tensile Strength Not specified 515-690 MPa
Yield Strength Not specified 205 MPa min
Elongation Not specified 40% min
Hardness Not specified 201 HB max
Typical Applications
ASTM A959 XM-26
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
SAE 30304
Used for chemical equipment, food processing machinery, architectural panels, fasteners, pressure vessels, and heat exchangers.
Key Differences
Can ASTM A959 XM-26 Be Substituted With SAE 30304?
ASTM A959 XM-26 and SAE 30304 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 XM-26
No active listings currently.
SAE 30304
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3000 mm (98.43–118.11 in)
On M-EX Right Now
ASTM A959 XM-26
0 active listings and RFQs →
SAE 30304
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-26 and SAE 30304?
ASTM A959 XM-26 specifies Ti which is not specified for SAE 30304.
Can ASTM A959 XM-26 be substituted with SAE 30304?
ASTM A959 XM-26 and SAE 30304 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.