Post Stock Login Register

ASTM A959 XM-27 vs ASTM A959 25-4-4

Related Material — 59.3% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-27 (ASTM A959:2011) and ASTM A959 25-4-4 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-27 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 25-4-4 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 XM-27 is defined under ASTM International, originating from United States, while ASTM A959 25-4-4 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-27 vs ASTM A959 25-4-4 is a 59.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.3%.

Frequently Compared With ASTM A959 XM-27:
ASTM A959 29-4 ASTM A959 29-4-2 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 26-3-3 ASTM A959 .- EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
59.3%
MECHANICAL MATCH
No shared data
OVERALL
59.3%
Specifications
Property ASTM A959 XM-27 ASTM A959 25-4-4
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.025
Cb (%) 0.05-0.20 Not specified
Cr (%) 25.0-27.5 24.5-26.0
Cu (%) <=0.20 Not specified
Mn (%) <=0.40 <=1.00
Mo (%) 0.75-1.50 3.5-4.5
N (%) <=0.015 <=0.035
Ni (%) <=0.50 3.5-4.5
P (%) <=0.020 <=0.040
S (%) <=0.020 <=0.030
Si (%) <=0.40 <=0.75
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-27
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 25-4-4
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 XM-27 Be Substituted With ASTM A959 25-4-4?
ASTM A959 XM-27 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-27
0 active listings and RFQs →
ASTM A959 25-4-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-27 and ASTM A959 25-4-4?
ASTM A959 XM-27 specifies Cb, Cu which are not specified for ASTM A959 25-4-4.
Can ASTM A959 XM-27 be substituted with ASTM A959 25-4-4?
ASTM A959 XM-27 and ASTM A959 25-4-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.