Post Stock Login Register

ASTM A959 XM-32 vs ASTM A959 16-8-2H

Related Material — 60.2% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-32 (ASTM A959:2011) and ASTM A959 16-8-2H (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-32 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 16-8-2H is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 XM-32 is defined under ASTM International, originating from United States, while ASTM A959 16-8-2H is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-32 vs ASTM A959 16-8-2H is a 60.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 60.2%.

Frequently Compared With ASTM A959 XM-32:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 20Cr12MoNiVH EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
60.2%
MECHANICAL MATCH
No shared data
OVERALL
60.2%
Specifications
Property ASTM A959 XM-32 ASTM A959 16-8-2H
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.08-0.15 0.05-0.10
Cr (%) 11.0-12.5 14.5-16.5
Mn (%) 0.50-0.90 <=2.00
Mo (%) 1.50-2.00 1.50-2.00
N (%) 0.01-0.05 Not specified
Ni (%) 2.00-3.00 7.5-9.5
P (%) <=0.025 <=0.045
S (%) <=0.025 <=0.030
Si (%) <=0.35 <=1.00
V (%) 0.25-0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-32
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 16-8-2H
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 XM-32 Be Substituted With ASTM A959 16-8-2H?
ASTM A959 XM-32 and ASTM A959 16-8-2H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-32
0 active listings and RFQs →
ASTM A959 16-8-2H
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-32 and ASTM A959 16-8-2H?
ASTM A959 XM-32 specifies N, V which are not specified for ASTM A959 16-8-2H.
Can ASTM A959 XM-32 be substituted with ASTM A959 16-8-2H?
ASTM A959 XM-32 and ASTM A959 16-8-2H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.