Post Stock Login Register

ASTM A959 XM-33 vs EN 10088-1 X4CrNiMo16-5-1

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-33 (ASTM A959:2011) and EN 10088-1 X4CrNiMo16-5-1 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-33 is defined under ASTM International, originating from United States, while EN 10088-1 X4CrNiMo16-5-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 XM-33 vs EN 10088-1 X4CrNiMo16-5-1 is a 71.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A959 XM-33:
GOST 5632 08X18H10 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
71.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A959 XM-33 EN 10088-1 X4CrNiMo16-5-1
Standard ASTM A959:2011 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.06 <=0.06
Cr (%) 25.0-27.0 15.0-17.0
Cu (%) <=0.20 Not specified
Mn (%) <=0.75 <=1.50
Mo (%) 0.75-1.50 0.80-1.50
N (%) <=0.040 >=0.020
Ni (%) <=0.50 4.0-6.0
P (%) <=0.040 <=0.040
S (%) <=0.020 <=0.015
Si (%) <=0.75 <=0.70
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-33
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X4CrNiMo16-5-1
Not documented
Key Differences
Can ASTM A959 XM-33 Be Substituted With EN 10088-1 X4CrNiMo16-5-1?
ASTM A959 XM-33 and EN 10088-1 X4CrNiMo16-5-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 XM-33
0 active listings and RFQs →
EN 10088-1 X4CrNiMo16-5-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-33 and EN 10088-1 X4CrNiMo16-5-1?
ASTM A959 XM-33 specifies Cu which is not specified for EN 10088-1 X4CrNiMo16-5-1.
Can ASTM A959 XM-33 be substituted with EN 10088-1 X4CrNiMo16-5-1?
ASTM A959 XM-33 and EN 10088-1 X4CrNiMo16-5-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.